Best Sliding Power Saws in 2026

Product 1: Axial glide system: The patented glide system allows wider cross cuts and better alignment while also being compact; This saves you 12 inch of valuable work space; Bosch glide miter saw also offers unmatched smoothness of cut

Product 1: Capacity: Expanded cutting capacity 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring

Product 1: Adjustable: The GCM12SD miter saw provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category best 90 percentage dust collection optimized for cutting 2x material with a vacuum

Part of the V20 cordless system

7-1/4in. V20 20V max* miter saw has a powerful 3, 800 RPM motor for cutting 2x dimensional lumber, hardwoods, baseboard and trim with ease

Part of the V20 cordless system

Powered by two LXT batteries; x2 LXT technology delivers more power, speed and run time without the hassles of a cord

Makita built electronically controlled BL motor delivers 4, 400 RPM for faster and smoother cutting.

The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life

Shadow guide cutting line projects a consistent and accurate cutting line on your work piece

Product dimensions – 29.5” D x 22.5” W x 20” H | Weight – 55 lbs. | Voltage – 120V | Blade size – 10” Diameter | Arbor hole size – 5/8” | Speed – 4,000 RPM | Max cut thickness – 5.5” | Cord length – 7 ft.

One-hand front miter Controls with push button miter detent override and front bevel release for quick movement | 15 amp motor for powerful cuts and blade brake for safety

Unique 2-steel rail sliding system design offers single slide-glide operation; reduced saw footprint allows operation flush against a wall

Increased capacity for up to 8" Crown molding (vertically nested), 6-3/4" baseboard (vertical), and 15" crosscuts at 90°

In-front bevel lock for convenient operation

Same tools. New name. Hitachi power tools has renamed to Metabo HPT

(Motor) Powerful 15 amp motor to tackle tough cutting jobs with ease

(Compact Slide System) Allows the saw head to slide along fixed rails, eliminating the need for rear clearance

Product 1: Powerful 15-amp motor crosscuts boards up to 12 inches wide and 3.75 inches thick

Product 1: Unique dual-rail slide system allows for compact operation flush against the wall while minimizing the saw’s footprint

Product 1: Bevel up to 45 degrees or miter up to 49 degrees in either direction

Powerful 15-amp motor crosscuts boards up to 13.25 inches wide and 4.5 inches thick

Unique dual-rail slide system allows for compact operation flush against the wall while minimizing the saw’s footprint

Bevel or miter up to 45 degrees in either direction (featuring 9 miter stops)

Product 1: Powerful 15-amp motor cuts boards up to 12 inches wide and 3-1/2 inches thick

Product 1: Miter 45 degrees in either direction (featuring 9 miter stops) or bevel 45 degrees to the left

Product 1: Onboard class II laser guide illuminates your line of cut

Compact slide system with large cutting capacity

Sliding sub-fence

Laser marker

7.25 INCH COMPOUND MITER SAW - This powerful yet compact saw features a 7.25" carbide tooth blade for fast, easy cross-cutting of dimensional lumber as large as 2x8

POWERFUL 10 AMP MOTOR - Powered by a robust 10 amp motor this miter saw has a max no load speed of 5000 RPM and is capable of cutting through some of the toughest job site materials.

BEVELS FROM 0-45 DEGREES - Make bevel cuts up to 45 degrees left, or miter cuts up to 45 degrees left and right. Ideal for everything from framing to finish work.

Powerful 15-amp, 3,600 rpm motor delivers extended power and durability

Adjustable stainless steel miter detent plate with 10 positive stops improves productivity and ensures cutting accuracy

Precise miter system and machined base fence support optimize cutting accuracy

Include a 3-year wear-and-tear warranty, 2-day standard repair time, and 1-month satisfaction guarantee.

The KAPEX features a rail forward design which increases precision and creates a compact footprint while preventing head play for accurate cuts.

Easily align cuts from the left or right side using the dual lasers. The lasers clearly define the material which will be removed during the cut.

10 in. Blade with versatile ip-down fence design provides best-in-class 16 in. Crosscut capacity

Dual bevel 45 left/45 right with front bevel release and 7 positive bevel stops at the most popular angles and easy to reach lever override to move between stops

50 left miter/60 right miter capacity with 10 miter detents and positive stops and 15 amp motor for powerful cuts and blade brake for safety

Flexible power -The 12-inch miter saw blade has the corded or cordless power

Runtime - The mitre saw provides up to 289 cross cuts in 3-1/4 inch baseboard

CUTLINE blade positioning system of DEWALT miter saw delivers accurate line of sight to the cut

Up to 13. 5 in. Cross cut capacity at 90°. Type: Single Bevel Saw

0 to 45 left and 0 to 50 right miter angle capacities

Miter stop at most used Crown molding angles

⚙【Powerful Miter Saw】- WIth 15 AMP/1800W motor, full-size performance at 4500 RPM and the 40T TCT chop saw blade installed , HYCHIKA sliding compound miter saw provides superior cutting ability for crosscut and miter cuts,offering more possiblities for cutting various materials.Perfect for wood,plastic,aluminum alloy .

⚙️【Single Bevel Cutting&Laser Line】- Single-bevel allows the head to 45°cuts (L) up to 8-1/4inch*3-1/8 inch. With 9 positive stops, you can adjust the bevel angle to meet different cutting requirments and do accurate cutting.It's also equipped with a visible laser indicator to improve cutting accuraacy and predictable blade position.

⚙【Easier Bevel Cuts】- The extended table of this the miter saw offers a larger space .With vice clamping ensure better support and balance to prevent material from warping.Double linear sliding rail(max cutting up to 305mm/12in) design can ensure the cutting work more stable, more accurate. The sliding design extends the length of the cut, making it a more powerful miter saw .

14" Mitering Chop Saw

Powerful 15A / 1450 rpm

Mitering Base & Blade

Stainless-steel miter detent plate of 12-inch miter saw blade comes with 14 positive stops

The mitre saw features the precise miter system and machined base fence support

Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically

Product 1: POWERFUL 15 AMP MOTOR - Delivers 4,800 RPM for quick, detailed cuts

Product 1: DUAL BEVEL – Perform cuts in four positive stop positions at 48° & 45° left, 0°, and 45° right

Product 1: LED SHADOW LINE - Provides high precision cuts with greater accuracy than lasers

GREATER VERSATILITY: Adjustable left and right fence and extension tables.

FAST ANGLE ADJUSTMENTS: Change miter angles quickly with the single-motion thumb lever.

EFFICIENT DUST COLLECTION: 2-1/2" adapter connects port to a dust collection bag.

GREATER SUPPORT: Adjustable left and right fence, and extension tables.

SMOOTH SLIDE OPERATION: Enclosed linear bearings.

MAXIMUM CONTROL: Ergonomic, D-shaped, ambidextrous, rubber grip handle.

👍【Main Parameter】Power: 96W; Maximum speed 8000 rpm; Saw Blade Diameter: 60mm/2.36in; Depth of Cut: 10mm/0.39in; Product Size: 183 x 131 x 79mm / 7.20 x 5.16 x 3.11in.

👍【Quality Material Structure】Made of aluminum alloy and cold rolled steel material, this Table Saws has impact resistance, high hardness and dimensional durability, and it can provide long service time.

👍【Feature】Portable mini saw, low noise, high efficiency. Ideal for Small Hobby and DIY Crafts.

Includes full manufacturer warranty

【Precise Cuts】The sliding track with laser guide helps you make precise cuts at 9 positive stop positons every time from -45° to 45° of dual bevel ensuring that your projects are accurate and professional-lookingfessional-looking

【Versatility】With 15-Amp powerful moter and 10-inch blade, this miter saw can handle a wide variety of materials and projects, from cutting baseboards and crown molding to crafting wooden furniture and outdoor structures

【Easy to Use】The saw's intuitive controls and clear instructions with rich accessories including 1 pair of carbon brush,2 pcs hex key,1 pc dust bag,1 pc working clamp,1 pc TCT saw blade, 1 pc locking handle make it easy to operate, even for beginners

Powerful 24-volt brushless motor - for better cutting performance

Sliding design - allows for cross-cutting standard 2 x 10 lumber. Dual bevel - to provide more flexibility in cuts

Aluminum table - designed to be lightweight and compact for easy transport. Base has a built-in 6-in extension table

Powerful 15 Amp motor and 5000 RPM is perfect for the jobsite

Extended Miter Ranges: 0° to 50° miter capacities with positive stops to accommodate a wide variety of cuts

Positive Miter Stops: Quick adjustment positive miter stops at most common angles 0°, 15°, 22.5°, 31.6°, and 45° left and right

Brand:Unbranded

Product 1: Universal design fits nearly every miter saw on the market

Product 1: Take on boards up to 10 feet in length and up to 750 pounds in weight

Product 1: Extend the support arms anywhere from 34 to 69 inches to support boards up to 10 feet long

Includes full manufacturer warranty